 | Torx T50 "bit"
 | (for 91 power seats, anyway - other seats may use a different size)
 | I've heard T35 and T40, so check yours to be sure - most likely,
you'll have to buy a set anyway to cover any of these sizes, and
it's good to have a set of Torx bits, as they're being used more and
more |
|
|
| Torx T10 and T25 bits (included in the Saab tool kit)
| For removing plastic trim panels from power seats |
|
| 3/8" drive ratchet
| Desirable: 3/8" x 12" breaker bar, to break bolts loose
| Also easier to get into cramped spaces |
|
|
| Torx T40 bit or 17mm socket
| For removing seat belt anchor |
|
| Desirable: ohm meter, to measure heater and thermister resistance
| A test light or buzzer should do for the heater element check |
| It's probably not necessary to check the thermister |
|
| Utility knife |
| Soldering iron and electronics-grade solder |
| Coat hanger |
| Desirable: Common, needle nose and diagonal cutter pliers |
